MiDAS2.2 Family(ISP Flash MCU)

Download (Documentation Materials)

PRODUCT

Brief User's Manual (Eng)

Brief User's Manual (Kor)

User's Manual

GC89C510A0

20-SOP
16-SOP
8-SOP

(Down)

(Down)

(Down)

GC89C500A0

GC89C501A0

GC89C510A1

8-SOP

GC89C500A1

GC89C501A1

General Description
MiDAS2.2 Family offers very fast performance available in 80C51-compatible microcontroller.
It features a newly-designed processor core that executes each instruction up-to 3 times faster than original 80C52 processor for the same clock speed. CORERIVER Semiconductor offers not only the chips but also its user-friendly development tools such as 1) MDS (MCU Development System),
2) S/W generation and debugging tools including optimizing C-compiler, 3) Application system, and
4) ROM writer.

Application Areas

Industrial Control and Automation, Consumer Electronics, Gaming Equipment, Home Appliance, mobile & Ubiquitous.

Features
  • CPU
    - 8bit turbo 80C52 architecture
    - 4 cycles/1 machine cycle
    - Instruction level compatible with Intel 80C52
     
  • 4K Bytes FLASH (Including 128B User EEPROM)
     
  • 128 Bytes RAM
     
  • Operating Voltage : +2.2V to +5.5V
     
  • Operating Frequency (FSYS)
    - Max. 6 MHz @+2.2V to +5.5V
    - Max. 12 MHz @+2.7V to +5.5V using +2.7V Reset IC
     
  • Max. Programmable 18 (20-SOP), 14(16-SOP), 6(8-SOP) I/O Pins
    - Pull-up control, Open drain & Push-Pull output
    - TTL and CMOS compatible logic levels

  • Low Voltage Detector
     
  • Internal Ring OSC with Calibration function
    - 4MHz @+2.7V to +5.0V (    ±3%)
    - 32 kHz @+2.7V (    ±10%) : Low Power OSC.
     
  • 16-channel 10-bit ADC
    - Max 30K SPS @F    ADC = 3MHz (FSYS = 6MHz)
    - Max 60K SPS @F    ADC = 6MHz (FSYS = 12MHz)
    - Programmable input clock frequenc    y
     
  • Supporting ISP/IAP/MDS
     
  • 16-bit Programmable Watchdog Timer
     
  • Two 16-bit Timer / Counters
     
  • Full-Duplex 1-channel UART Comm.
     
  • 2-channel I2C Comm. (Master/Slave, I2C Slave)
     
  • 1-channel 8-bit high speed PWM
     
  • 13 interrupt sources
    - Timer0/1, WDT, LVD, ADC, UART, PWM, I2C 0/1
    - 4 External Interrupt Sources : Both Edge/Level
    - Two-level interrupt priority
     
  • Reset scheme
    - On-chip Power-On-Reset (POR)
    - External reset
    - Low voltage detector reset (LVR)
    - Watchdog Timer Reset
     
  • Power consumption
    - Reset Sources + 4 External Interrupt (Both Levels)
    - WDT interrupt
     
  • Power consumption
    - Active current : Max 2 mA @+3.0V, 2 MHz
    - Idle current : Max 0.5mA @+3.0V, 2 MHz
    - Stop current : Max 5uA @+3.0V (WDT ON)
                           Max 1uA @+5.0V (All Clock OFF)
     
  • E.S.D. protection up to 2000V

  • Latch-up protection up to ±200mA

  • Package
    - 20 - SOP (JEDEC)
    - 16 - SOP (Narrow)
    - 8 - SOP